Installation and conversion work for the company Medartis AG at its headquarters in Stücki Park Basel.
For Medartis AG, a company active in medical technology, we built their new production areas and offices in Stücki Park in 2009. Since then, the company's headquarters have been located at this site.
The company's space extends over two buildings and previously covered a total area of around 7,000 m2, of which approximately 4,000 m2 was used for production.
After the installation of Medartis AG, various extensions were made in the area of materials research, e.g. for the 3D printing process as well as materials testing and physical technology laboratories. The extensions were worked out in close cooperation with the operators from research and development. The expansion of the production areas on the 3rd floor of House D has been in operation since February 2017.
From July 2018, various installations and conversions were again carried out on Levels 1, 4, 5 and 7 in House D and E over a total usable area of approximately 2,500m2. This involved the installation of 3-printer systems, offices, storage and the expansion of the cafeteria. In addition, a clean room according to the latest standards was installed on an area of 600m2, which is used for the sealing and labeling of titanium implants for delivery to hospitals and doctors. In order to make optimum use of the limited space available, an external wall with windows was integrated into the clean room. For this purpose, the windows were specially sealed and bolted.
The existing structures in terms of access, sanit
ary facilities, etc. were retained.
